Table of C
on
ten
ts
M
enu Lists
Inde
x
GB
Creating a standard
definition image
quality disc with a
recorder, etc.
You can copy images played back on this
product on a disc or video cassette, by
connecting this product to a disc recorder,
etc. with an AV Cable (sold separately).
Refer also to the instruction manuals
supplied with the devices to be connected.
Notes
3D movies are converted to 2D with standard
definition image quality.
Connect this product to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 13).
High definition image quality movies will be
copied with standard definition image quality.
1
Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.
2
Connect this product to the
recording device (a disc recorder,
etc.) with an AV Cable (sold
separately).
Connect this product to the input jacks of
the recording device.
3
Start playback on this product,
and record it on the recording
device.
Refer to the instruction manuals supplied
with your recording device for details.
4
When dubbing is finished, stop
the recording device, and then
this product.
Notes
Since copying is performed via analog data
transfer, the image quality may deteriorate.
You cannot copy images to recorders connected
via an HDMI cable.
To copy date/time information, camera data,
and coordinates (DEV-50V), select
(MENU)
[Setup]
[
Playback Settings]
[Data Code]
a desired setting
.
When the screen size of display devices (TV,
etc.) is 4:3, select
(MENU)
[Setup]
[
Connection]
[TV Type]
[4:3]
.
When you connect a monaural device, connect
the yellow plug of an AV Cable (sold separately)
to the video input jack, and the white (left
channel) or the red (right channel) plug to the
audio input jack on the device.
Input
VIDEO
(Yellow)
(White)
AUDIO
Signal flow
(Red)
