background image

59

GB

 

 

 

 

 

O

ther Op

erati

ons

Naming inputs

You can enter a name of up to 8 characters for 
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with 
the names of the connected components. 

1

Press the input button to select 
the input you want to create an 
index name for.

You can also use INPUT SELECTOR on 
the receiver.

2

Press AMP MENU.

“1-LEVEL” appears on the display.

3

Press 

V

/

v

 repeatedly to select 

“5-AUDIO”.

4

Press  

or 

b

 to enter the 

menu.

5

Press 

V

/

to select “NAME IN”.

6

Press  

or 

b

 to enter the 

parameter.

The cursor flashes and you can select a 
character. Follow the procedure given in 
“To create an index name” (page 56).

Changing the display

You can check the sound field, etc., by 
changing the information on the display.
Be sure to use the buttons on the receiver for 
this operation.

Press DISPLAY repeatedly.

Each time you press the button, the display 
changes cyclically as follows.

All inputs except the FM and AM 
band

Index name of the input

a)

 

t

 Selected input 

t

 Sound field currently applied

FM and AM band

Program Service name

b)

 or preset station 

name

a)

 

t

 Frequency 

t

 Program Type 

indication

b)

 

t

 Radio Text indication

b)

 

t

 

Current Time indication (in 24-hour system 
mode)

b)

 

t

 Sound field currently applied

a)

Index name appears only when you have assigned 
one to the input or preset station (page 56, 59). 
Index name does not appear when only blank 
spaces have been entered, or it is the same as the 
input name.

b)

During RDS reception only (models of area code 
CEL, CEK only) (page 57).

Note

Character or marks may not be displayed for some 
languages.

Summary of Contents for DG510 - STR AV Receiver









































































Reviews: