Getti
ng Sta
rte
d
11
GB
5
Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press
?/1
, the system turns on
and the demonstration automatically ends.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
6
(Except for Latin American model)
Set the color system according to your
TV.
The color system is factory set to NTSC for
region code 3 models, and PAL for other
region code models. Each time you perform
the procedure below, the color system
changes as follows:
NTSC
y
PAL
Use the buttons on the unit.
1
Press
?/1
to turn off the system.
2
Press
?/1
while holding down
X
.
The system turns on and the color system
is changed.
Before connecting the Center
and Rear speakers
Stick the supplied speaker pads to the bottom of
the center speaker and rear speakers to stabilize
the speakers and prevent them from slipping.
After hooking up the system, we recommend to
place the system as follows:
When placing the speakers on top of the sub
woofer and the main unit, be sure to place the
foot of the speakers to fit in the hollows on top
of the sub woofer and the main unit.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Do not place the rear speakers on top of a TV. This
may cause color distortion in the TV screen.
• Be sure to connect both left and right rear speakers.
Otherwise, the sound will not be heard.
Rear speaker
Center speaker
Z
Z
Z
x
X
>
.
+
M
m
–
hH
?/1
Sub woofer
Main unit
Front speaker
(Right)
Front speaker
(Left)
Z
Z
Z
x
X
>
.
+
M
m
–
hH
?/1
Front speaker
(Right)
Front speaker
(Left)
Optional stand WS-FLX9
(not supplied)
Sub woofer
Main unit
continued
