40
GB
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
There are two ways to store the station presets.
Setting presets through
automatic tuning
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Press and hold
m
or
M
until the
frequency indication starts to change,
then release.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 through 4 of
“Setting presets through manual tuning”.
3
Press TUNER MEMORY while pressing
SHIFT on the remote.
A preset number appears in the display. The
stations are stored from preset number 1.
4
Press ENTER on the remote.
The station is stored.
5
Repeat steps 2 through 4 to preset
other stations.
Setting presets through
manual tuning
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Press
m
or
M
repeatedly to tune in
the desired station.
3
Press TUNER MEMORY while pressing
SHIFT on the remote.
A preset number appears in the display. The
stations are stored from preset number 1.
4
Press ENTER on the remote.
The station is stored.
5
Repeat steps 2 through 4 to preset
other stations.
Tuner
Presetting radio stations
To
Method
Automatically tune in
all of the stations that
can be received in your
area and then store
them manually
Automatic Tuning Preset
Manually tune in and
store the radio
frequency of your
favorite stations
Manual Tuning Preset
TUNED
Preset number
TUNED
Preset number
