56
GB
To stop recording
Press
x
.
Tips
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting the
DVD function and not playing a disc.
• When high level sound signals are input, the unit
automatically adjusts the recording level to prevent
distortion of the recorded sound signal (Auto Level
Control Function).
MULTI CHANNEL DECODING indicator:
Lights up except when the 2 channel source is
being played back in DVD or DIGITAL
function.
PRO LOGIC indicator
(in the display)
:
Lights
up when the unit applies Dolby Pro Logic
processing to 2 channel signals in order to output
the center and rear channel signals.
;
Digital indicator
(in the display)
:
Lights
up when the unit is decoding signals recorded in
the Dolby Digital format.
dts indicator
(in the display)
:
Lights up when
DTS signals are input.
You can set the system to turn off at a preset
time, so you can fall asleep to music.
Press SLEEP on the remote.
Each time you press the button, the minute
display (the turn-off time) changes as follows:
AUTO*
t
90
t
80
t
70
t
…
t
10
t
OFF
* The power turns off when the current disc or tape
finishes playback (for up to 100 minutes).
Other operations
** You cannot check the remaining time if you select
“AUTO”.
About indicators
Falling asleep to music
— Sleep Timer
To
Press
Check the remaining
time**
SLEEP on the remote once.
Change the time to
turn off
SLEEP on the remote
repeatedly to select the time
you want.
Cancel the Sleep
Timer
SLEEP on the remote
repeatedly until “SLEEP
OFF” appears.
