DHCMD5 3-858-047-12 (1)EN
5
FM 75
Ω
COAXAL
AM
Step 2: Setting the
time
You must set the time beforehand to use the
timer function.
2
Connect the FM/AM aerials.
Set up the AM loop aerial, then connect
it.
Connect the mains lead to a wall
outlet.
Inserting two R6 (size AA)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
1
Press TIMER SET.
2
Turn MULTI JOG and set the hour.
The clock is on a 24-hour system.
3
Press ENTER/YES.
4
Turn MULTI JOG and set the
minute.
5
Press ENTER/YES.
The clock starts working.
To change the preset time
1
Press TIMER SET.
2
Turn MULTI JOG until “CLOCK SET?”
appears, then press ENTER/YES.
3
Repeat steps 2 to 5.
Extend the FM lead
aerial horizontally.
3
]
]
}
}
AM loop aerial
®
∏
·
π
§
º
‚
2,4 3,5
1
