background image

Connecting to a Windows computer

10

2

Click [Handycam].

3

Click [ImageMixer].

4

Select the language for the installation, 
then click [OK].

5

Click [Next].

6

Follow the on-screen instructions.

z

Tips

• If you use this software personally, enter 

[Personal] etc. for [Company Name].

• Read the [Readme.txt] file (Memo Pad) when it 

appears, then click 

 (Close) to close Memo 

Pad.

7

Click [Finish].

The installation of ImageMixer is complete.

8

Click [OK], then install WINASPI* 
following the on-screen instructions.

* You need this software to copy the pictures 

edited on your computer to a CD-R.

9

Click [End].

The installation for WINASPI is complete.

If DirectX 8.0a or a later version is not 
installed on your computer

Go on to step 10 to install DirectX 8.0a.

If Windows XP, or DirectX 8.0a or a 
later version is installed on your 
computer

When [InstallShield Wizard Complete] is 
displayed on the screen, click [Finish], then 
[OK].
The computer restarts automatically. Then, 
remove the CD-ROM. (You can skip the 
rest of the procedure.)

10

Click [OK] to continue the installation 
of DirectX 8.0a.

1

Read [License Agreement], then click 
[Yes].

2

Click [Install DirectX] (or [ReInstall]).

Summary of Contents for Digital Video Camera Recorder

















































Reviews: