4-18
Chapter 4 Adjustments and Settings for Recording
4
SHUTTER SPEED page (factory settings)
3
Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the mode or shutter speed you want (or use
the rotary encoder).
4
To use the selected mode or speed (the “ON” setting), turn the rotary
encoder counterclockwise as seen from the front of the camera. In
order not to use it (the “OFF” setting), turn the rotary encoder
clockwise.
Note that pushing the MENU CANCEL/PRST/ITEM switch to
CANCEL/PRST has no effect on the SHUTTER SPEED page.
To select another mode or speed, return to step
3
.
5
To end the menu operation, set the MENU ON/OFF/PAGE switch to
OFF.
The setup menu disappears from the viewfinder screen and the
display indicating the current status of the camcorder appears along
the top and bottom of the viewfinder.
a) 1/100 for DNW-7/90/90WS/9WS or 1/60 for DNW-7P/90P/90WSP/9WSP
∗∗∗
SHUTTER SPEED
∗∗∗
EVS
CLS
1/100
1/125
1/2000
1/1000
1/500
1/250
m
: ON
: ON
: ON
: ON
: ON
: ON
: ON
: ON
a)
CLS mode
EVS mode
Shutter speeds selectable
in standard mode
