Preparations
2-27
Chapter 2 Preparations
Contents of the audio settings subpages
When you change the settings of the
audio settings subpages, the settings of
the AU-1 page change as well, and
vice versa.
However, when there is no item in the
subpages corresponding to a setting
made in the AU-1 page, the setting is
not reflected in the subpages.
Input mixing settings page
By pressing operation buttons F1 to
F3, you can make the following three
settings for mixing of input signals in
audio channels 1 and 2. The selected
setting is highlighted. To select input
signals, use audio settings page 1-1.
MIX OFF: Assign IN-1 to channel
1, and assign IN-2 to channel 2.
1+2
n
1: Assign mixed signals of
IN-1 and IN-2 to channel 1, and
assign IN-2 to channel 2.
1+2
n
2: Assign IN-1 to channel 1,
and assign mixed signals of IN-1
and IN-2 to channel 2.
Output monitor settings page
By pressing operation buttons F1 to
F3, you can make the following three
settings for left and right monitor
output signals. The selected setting is
highlighted.
L/R=1/2: Assign channel 1 to
monitor output L (left), and
assign channel 2 to monitor
output R (right).
1
˜
2: Assign channel 2 to monitor
output L, and assign channel 1 to
monitor output R.
1+2: Assign mixed signals from
channels 1 and 2 to monitor
output L and R.
Summary of Contents for DNW-A25
Page 1: ...DIGITAL VIDEOCASSETTE RECORDER DNW A25 A25P OPERATION MANUAL 1st Edition Revised 4 English ...
Page 100: ......
Page 136: ......
Page 162: ......
