C:\#WORK\@DPF\DPF-A72N\Writer-OP\06_FinalDelivery\GB\4155760111\4155760111DPF-A.E.D.72NCEK\040C02.fm
Master:
Left
DPF-A72N/E72N/D72N 4-155-760-
11
(1)
22
GB
Inserting a memory card
Insert the memory card firmly into the
corresponding slot with its label side
facing toward you (when you are facing
the back side of the photo frame).
The access lamp flashes when the memory card
is inserted correctly. Reinsert the memory card
after checking the label side of the memory
card if the access lamp does not flash.
For details on the memory cards you can use
with this photo frame, see pages 56 to 58.
To remove a memory card
Remove the memory card from its slot in the
opposite direction from which it was inserted.
Notes
• When inserting the memory card, it will only insert
part of the way, so do not try to force it as this could
damage the memory card and/or photo frame.
• The “Memory Stick PRO” (Standard/Duo)/SD
memory card/MMC/xD-Picture Card multi-purpose
slot automatically detects the card type. The slot is
also both a “Memory Stick” standard and Duo size
compatible slot, so you do not need a “Memory
Stick” adaptor.
• Do not insert multiple memory cards into
A
,
B
or CompactFlash card/Microdrive (DPF-D72N
only) slots simultaneously. If multiple memory
cards are inserted, the photo frame will not work
properly.
• Before using a memory card, see “About memory
Display priority of images
If a memory card is inserted, the images of the
inserted memory card are displayed automatically.
To manually change the memory card to be displayed,
specify it in
(Select device) menu (page 40).
The photo frame displays the images of the device
in the following priorities.
• Memory cards
b
Internal memory
•
If no memory card is inserted,
the images saved in
the album in the internal memory are displayed.
Notes
• Due to one of the characteristics of the internal
memory device, images stored for long time or read
many times may be subject to data error when read
too often.
• For the file formats that the photo frame can
display, see page 59.
Access lamp
Insert xD-Picture Card, SD memory card, or
“Memory Stick” from the top into the slot
A
.
Insert “Memory Stick Duo” into
the slot
B
.
CompactFlash card
(DPF-D72N only)