C:\#WORK\@DPF\DPF-A72N\Writer-OP\06_FinalDelivery\GB\4155760111\4155760111DPF-A.E.D.72NCEK\050C03.fm
Master:
Right
DPF-A72N/E72N/D72N 4-155-760-
11
(1)
45
GB
Adv
anc
ed
op
erati
o
n
s
Items to set
*: Factory default settings
Item
Setting
Description
Slideshow
Settings
Refer to “Enjoying a slideshow” (page 29).
Auto power
ON/OFF
Sets the timer function which turns the power supply of the photo frame on or off,
automatically. You can use this function with the following settings. (
.
Simple
Power-ON
timer
You can set the timer (time/day) and input time for the
power to turn on automatically, when you set this
function to enable.
Power-OFF
timer
You can set the timer (time/day) and input time for the
power to turn off automatically, when you set this
function to enable.
Advanced
(DPF-D72N
only)
The following functions are enabled when you press the following buttons
after you have set time or date to turn on or off the photo frame
automatically.
OK
Returns to the previous screen after confirming the
operation.
Cancel
Returns to the previous screen after cancelling the
operation.
Reset all
Deletes all the selected times.
Setup method
(DPF-D72N
only)
Advanced*
Sets the auto power ON/OFF function according to a
day of the week by one hour units.
Simple
Sets the auto power ON/OFF function finely in one
minute increments.
Date/time
settings
Sets the date, time, first day of a week, etc. (
.
General
Settings
Listing Order
Sets the display order of images. This setting affects the order in
[Slideshow Settings].
Number Order*
Displays images in order of image numbers.
Shoot. Date
Displays images in order of date of modified file as
shooting date.
Note
If you add images in Album size to the album (internal
memory), images are displayed in almost the same
order as by the shooting date. That is because the date
that the file was modified is changed to the shooting
date in Exif information contained on the file.
Auto display
orientation
ON*/OFF: You can set the photo frame to automatically detect and rotate
the orientation of images.
LCD backlight
Allows you to set the brightness of the backlight of the LCD screen to a
level from 1 to 10*.
Continued