13
Setting Up
Setting Up
Inserting a “Memory Stick” or PC card
To view images recorded on your “Memory Stick” or
PC card, or to record images onto a CD-R/RW, insert a
“Memory Stick” or PC card into the corresponding
slot.
For details about “Memory Stick”, see page 76.
For details about PC cards, see page 79.
Inserting a “Memory Stick”
With the arrow facing upward and on the left, insert
the “Memory Stick” into the “Memory Stick” insertion
slot until it clicks into place.
Ejecting the “Memory Stick”
Check that the MEMORY STICK indicator is not
flashing, then press the “Memory Stick” lightly. After
the “Memory Stick” pops out, remove it slowly.
Notes
• While this system is
reading/writing data
(MEMORY STICK
indicator flashes), do
not eject the “Memory
Stick”. Otherwise, the
data may be erased or
damaged.
• While this system is
operating, do not move,
lift it up, or disconnect
the AC power cord.
• If the “Memory Stick”
does not fit into the slot
properly, check the
direction of the arrow
on the “Memory Stick”.
Then re-insert it into
the slot.
• Do not attempt to force
the “Memory Stick”
into or out of the slot.
Otherwise, the
“Memory Stick” or the
file may be damaged.
with the arrow
facing upward
and on the
left
“Memory Stick”
MEMORY STICK
indicator
continued
