23
GB
Basi
c ope
rati
ons
Turning the photo frame
on
When the power switch is set to
off
When the power switch is set to on, the standby
indicator turns green and the Sony logo on the
front panel lights up.
When the power switch is set to
on
Press
1
(on/standby) on the photo frame or
remote control to turn on the power. The
standby indicator turns to green from red
.
The
Sony logo on the front panel lights up.
Turning off the power
Hold
1
(on/standby) on the photo frame or
remote control until the power turns off. The
standby indicator turns to red from green
.
Note
Do not turn the photo frame off or disconnect the AC
adaptor from the photo frame before the standby
indicator turns red. Doing so may damage the photo
frame.
Operations in an initial state
When the photo frame is turned on without a
memory card connected, the initial display
below appears on the screen.
If the photo frame is not operated for 10
seconds, the demo mode is displayed. If any
other button than the power button is pressed,
the screen returns to the initial display.
First, press MENU during the initial display,
and then set the date and time.