41
GB
Tabl
Let
E
T
In
Using the auto power ON/OFF timer
You can use the timer function to turn the photo frame ON or OFF automatically.
1
Press MENU on the rear of the photo frame.
The menu appears.
2
Tap [Settings].
3
Tap [Auto Power ON/OFF].
• If you cannot find [Auto Power ON/OFF] on the display, scroll with your finger up or
down on the display.
4
Tap [Setup Method] then tap to select a
setup method.
[Advanced]:
You can set the auto power ON/OFF
function in one-hour units independently for each
day of the week.
[Simple]:
You can set the auto power ON/OFF
function in one-minute increments.
[Auto off]:
You can set the auto power off time as a specified time that has elapsed with
no operation after the photo frame is turned on. You can specify two or four hours as
an elapsed time.
[OFF]:
You can disable the auto power ON/OFF timer.
5
Tap [Time Setting].
Set the time for the selected setup method as described in “Setting the time” (page 42).
