6-1
DSC-H50_ADJ
Before starting adjustments
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by
z
in the following table.
Note:
When replacing the SY-201 board, erase the data in internal memory of the board before replacement.
Table 6-1-1
SECTION 6
ADJUSTMENTS
LCD unit
(AF illumination LED)
(Timing gen., CCD signal process)
(Video amp.)
(PITCH, YAW sensor)
LCD901
D002
IC304
IC602
SE502, SE501
(COMPLETE)
(COMPLETE)
LCD block
LE-042 board
SY-201 board
SY-201 board
SY-201 board
LE-042 board
ST-195 board
SY-201 board
Destination Data Write
Destination data write
z
USB Serial No. Input
USB serial No. input
z
Composite video level
adjustment
Composite video level adj.
z
z
Component out Y level adj.
Component out Pb level adj.
Component out Pr level adj.
CAMERA adjustment 1
Hall adj.
z
z
CAMERA adjustment 2
Wide limit adj.
z
z
CAMERA adjustment 3
Flange back adj.
z z
z
CAMERA adjustment 4
Flange back check
z z
z
CAMERA adjustment 5
Light falloff balance adj.
z z
F No. compensation
Measure gain, LV adj.
Mechanical shutter adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 8
Strobe adj.
z z
z
z z
CAMERA adjustment 9
Auto focus illumination check
z
z
z
CAMERA adjustment 10
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
z
Block
replacement
Mounted parts
replacement
z
z
z
z
z
LCD adjustment
CAMERA adjustment 7
z
CAMERA adjustment 6
z z
(COMPLETE) (Note)
Adjusting item
Adjustment
Component video level
adjustment
Board
replacement
Replaced parts
z
Lens block
CCD block assy (Including CD-737 flexible board and CCD imager)
Flash unit
z