13
G
e
tti
n
g
s
ta
rte
d
Battery remaining indicator
(When using the Nickel-Metal
Hydride batteries)
As the battery power decreases with use, the
battery remaining indicator displays the
amount of power remaining using the
following symbols.
•
If the LCD screen is off, press
to turn it
on.
•
Based on the conditions under which the
camera is being used and the state of the
charge, or on the environment, this information
may not be correctly indicated.
•
When the AC Adaptor (not supplied) is being
used, the remaining battery information is not
displayed.
The Power Save function
When the Power Save function is set to On,
you can shoot for a longer period of time.
Turn the mode selector to SET UP, and set
[Power Save] in Setup 1 to [On]. The
factory setting of the camera is set to [On]
(page 103).
We recommend that you set [Power Save]
to [On] when using alkaline batteries.
When the Power Save function is On
•
In shooting still images, the focus only focuses
when the shutter is pushed down halfway.
•
While charging the flash, the lamp flashes
and the LCD screen is turned off. After the
flash is completely charged, the LCD screen
turns on.
Battery
remaining
indicator
Battery remaining
guidelines
(A full charge is 100%)
Sufficient power remaining
Battery half full
Battery low, recording/
playback will stop soon.
Change the batteries for fully
charged ones, or charge these
batteries. (The warning
indicator flashes.)