49
A
d
van
ced st
ill
i
m
a
g
e shoo
ting
Adjusting the flash
level
– Flash Level
Mode selector:
You can adjust the amout of flash light.
Before operation
Set
(Camera) to any mode other than
[Auto] in the menu settings (page 23).
a
Set the mode selector to
.
b
Press MENU.
The menu appears.
c
Select [
] (Flash Level) with
b
/
B
, then select the desired
setting with
v
/
V
.
High:
Makes the flash level higher
than normal.
Normal:
Normal setting.
Low:
Makes the flash level lower than
normal.
•
You can carry out this operation even when the
mode selector is set to
(Clip Motion only).
Shooting multiple
frames
– Clip Motion
Mode selector:
You can shoot a number of still images
consecutively (GIF animation). Because the
file size is small, these images are ideal for
use on a home page, or for attaching to an e-
mail message.
•
Clip Motion images are restricted to color
levels of 256 colors and below. This is a
characteristic of GIF format recording. For this
reason, the image quality of some images may
deteriorate.
Normal (160×120)
The maximum number of frames you can
shoot in one Clip Motion shot is 10. This is
suitable for use on a home page.
Mobile (120×108)
Two frames is the maximum number that
can be shot in Clip Motion in this mode.
This is suitable for use with portable data
terminals.
•
Mobile mode has strict file size limits, so
picture quality falls accordingly.
Mode selector
Control button
MENU