1-6 (E)
DSM-T1
1-7. Rack Mounting
5.
Attach the rail brackets to the outer rails temporarily
using the screws (B 4
x
8) and plate nuts (large).
6.
Attach the outer rails to the rack using the screws
(B 5
x
12), washers (ø5), spring washers (ø5) and plate
nuts (small).
7.
Adjust the rail brackets to specified position, then
tighten the screws secured temporarily in the step 5.
8.
Install the DSM-T1 in the rack.
c
Be careful not to get caught your hand and finger in the
rack mount rail when installing the unit in the rack.
9.
After installing the DSM-T1 in the rack, secure the
unit to the rack using the screws (RK 5
x
14) and
ornamental washers.
Inner rail
The maximum traveling
distance : 580 mm
Outer rail
Rail bracket
Rack
The side installed
rack angle
Rail bracket
Plate nut (large)
Outer rail
Spec. : 52
+
5
mm
_
0
Rack
B 4
x
8
B 5
x
12
Spring washer ø5
Washer ø5
Plate nut
(small)
Rack
Ornamental washers
RK 5
x
14
Ornamental washers
RK 5
x
14
n
When the DSM-T1 is mounted in a rack, the maximum
traveling distance is illustrated below.