16
Location and Function of Parts
Cha
p
te
r 1
Ov
er
v
ie
w
B
Digital signal output section (optional DSBK-1601/1602/1803 boards required)
a
DV IN/OUT connector (6-pin IEEE-1394)
(optional DSBK-1803 i.LINK/DV Input/Output
Board required)
This i.LINK-compatible connector (subsequently referred
to also as the i.DV IN/OUT connector) outputs digital
video and audio signals in DV format.
Note
When searching at speeds in the range +
1
/
2
to +
1
/
30
or
−
1
/
2
to
−
1
/
30
times normal speed, the audio signal output
from this connector and monitored on external equipment
may sound differently from the audio signal played back
on this unit.
b
SDTI (QSDI) (Serial Data Transport Interface
(QSDI)) OUT connector (BNC type) (optional
DSBK-1602 SDTI (QSDI) Output Board required)
Outputs digital video and audio signals in SDTI (QSDI)
format.
Note
When searching at speeds in the range +
1
/
2
to +
1
/
30
or
−
1
/
2
to
−
1
/
30
times normal speed, the audio signal output
from this connector and monitored on external equipment
may sound differently from the audio signal played back
on this unit.
c
SDI (Serial Digital Interface) OUT connectors
(BNC type) (optional DSBK-1601 SDI/AES/EBU
Output Board required)
Output SDI-format digital video and audio signals. The
same signals are output from both connectors.
d
AUDIO OUT (AES/EBU) connectors (BNC type)
(optional DSBK-1601 SDI/AES/EBU Output
Board required)
These connectors output digital audio signals in AES/EBU
format. The left connector (CH-1/2) is for audio channels
1 and 2, and the right connector (CH-3/4) is for audio
channels 3 and 4.
AUDIO OUT(AES/EBU)
DV IN/OUT
SDTI(QSDI)OUT
CH-1/2
1
2
CH-3/4
SDI OUT
a
DV IN/OUT connector
b
SDTI (QSDI) OUT connector
d
AUDIO OUT (AES/EBU)
connectors
c
SDI OUT connectors
