26
Playback
C
h
apt
er 2
P
la
y
ba
c
k
Once set, the point A or B time code value is held in the non-volatile memory
of the unit until changed. It is not lost when the unit is powered off.
Note
When setting point A or B, you can only use a time code value. Even when
COUNTER is selected with the COUNTER SEL button, you cannot use a CNT
value to set point A or B.
To check the point A or B time code value
Press the
K
A
or
B
k
button on the menu control panel. While the button is
held down, the point A or B time code value is displayed on the monitor and in
the time counter display.
If you hold down the
K
A
and
B
k
buttons simultaneously, the value shown
is the point B time code value minus the point A time code value. If the point A
time code value is greater than the point B time code value, a minus sign (
−
) is
shown before the value.
Inputting time code values for points A and B
Using the following procedure, you can modify the time code value for point A
or B.
1
Press the MENU button.
The following menu display appears.
A
B
MARK
1,15
5,7,9,12 13
8,11 12
2,3,4,6,10,11
Setup menu
SYSTEM MENU
SETUP MENU
HOURS METER
Monitor screen
Time counter display
