17
Location and Function of Parts
Cha
pt
er 1
Ov
er
v
ie
w
j
SYNC (synchronization) PHASE control
Turn this control to accurately adjust the synchronization
phase of the output video signal of the unit with respect to
the reference video signal. Use a cross-point (Phillips)
screwdriver to turn it.
C
Tape transport control section
a
EJECT button
When you press this button, it lights and the cassette is
automatically ejected after a few seconds.
b
REW (rewind) button
When you press this button, it lights and the tape starts
rewinding (maximum 85 times normal speed).
When the F. FWD/REW menu item
is set to
PB, you can monitor the playback picture during the
rewind.
c
REC (record) button
When you press the PLAY button while holding down this
button, it lights and recording begins.
d
PLAY button
When you press this button, it lights and playback begins.
If you press this button during recording or editing, the
recording or editing operation is stopped and this unit
enters playback mode.
e
F FWD (fast forward) button
When you press this button, it lights and the tape is fast
forwarded (maximum 85 times normal speed).
When the F. FWD/REW menu item
is set to
PB, you can monitor the playback picture during the fast
forward.
f
STOP button
Press this button to stop the current tape transport
operation.
Note
No tape transport control buttons other than the EJECT
and STOP buttons will work while the REMOTE button in
the remote control setting section is lit. This can be
changed with the LOCAL ENABLE menu item
a
EJECT button
b
REW button
c
REC button
f
STOP button
e
F FWD button
d
PLAY button
Summary of Contents for DSR-1800A
