45
Playback
The maximum shuttle playback speed can be changed with
the MAX SRCH SPEED menu item (see page 67).
Jog:
Press the SEARCH button or search dial to select jog
mode (the JOG indicator lights). Playback is carried
out at a speed determined by the rotation speed of the
search dial. The playback speed range is
±
1 times
normal speed.
Variable:
Press the VAR button, lighting it (the
SHUTTLE indicator also lights). You can control fine-
grained (in 61 steps) playback over the range
±
2 times
normal speed.
Playback using the tape speed override
(TSO) function
You can use the tape speed override function to adjust the
playback speed temporarily. This function is convenient
for playback phase synchronization with another VCR
playing back the same program.
1
(A)Hold down the PLAY button, and turn the search
dial in the desired direction to adjust the playback
speed.
The range of speed adjustment is ±15% in steps of
1%.
(B)Hold down the PLAY button, and press the
J
(CUE) or
j
buttons to adjust the playback speed.
The playback speed can be adjusted to ±8% only.
2
When the adjustment is completed, release the PLAY
button.
The playback speed returns to normal speed.
Search operations via external equipment
You can control the unit in the following operation modes
from an editing control unit connected to the REMOTE IN
(R) connector on the rear panel, the supplied remote
control unit connected to the CONTROL connector, or
control equipment connected to the iS400(i.LINK)
connector.
To search while playing at fast speeds
Shuttle:
Use this mode to view color video playback at
speeds ranging from 0 to 60 times normal speed in
both directions.
Jog:
Use this mode for low-speed search and frame-by-
frame search. You can specify how speed changes in
response to rotations of the search dial by using the
JOG RESPONSE menu item
.
Variable:
Use this mode to monitor noise-free video and
audio signals at speeds ranging from 0 to 2 times
normal speed in both directions.
Still:
Use this mode to view a still picture of any field.
Jog audio:
Use this mode to monitor the audio at speeds
ranging from 0 to 1 times normal speed in both
directions.
Note
When controlling this unit from external equipment, set
the REMOTE I/F menu item
mode selector so that the remote mode indicators in the
display section are on or off as follows.
•
When using an editing control unit connected to the
REMOTE IN (R) connector:
•
When using an RM-LG2 connected to the
CONTROL connector:
•
When using equipment connected to the
iS400(i.LINK) connector:
For description on how to carry out search operations via
external equipment, see the operating instructions for the
equipment.
1
(A)
,1
(B)
,2
1
(B)
1
(A)
Display section
Switch/menu item
Setting
Control mode selector
REMOTE
(REMOTE indicator lights.)
REMOTE I/F menu item
9PIN
(9P indicator lights.)
Switch/menu item
Setting
Control mode selector
LOCAL
REMOTE I/F menu item
—
Switch/menu item
Setting
Control mode selector
REMOTE
(REMOTE indicator lights.)
REMOTE I/F menu item
i.LINK
(i.LINK indicator lights.)
Summary of Contents for DSR-DR1000P
Page 10: ...10 ...
Page 28: ...28 Location and Function of Parts ...
