Sony DSR-DR1000P Operating Instructions Manual Download

Page: 13 / 111

Features

playback of any materials already recorded on the hard
disk. During recording, cue points can be set at any point
from the control panel or from the supplied RM-LG2
Remote Control Unit, and the unit can go back to play the
material from the cue points. This makes it possible for this
unit alone to provide slow-motion playback of highlight
scenes and other kinds of replay required in broadcasts of
sporting and live events.

* Slow-motion playback during recording is possible over the range (normal

speed.

Program playback (clip segment playback)

You can extract scenes (up to 200 scenes) anywhere in the
materials on the hard disk to create playlists. This unit
follows the playlist to play the materials automatically,
allowing you to play sequences with this unit alone. You
can check and modify the lists on the monitor.

Multi-simultaneous playback (9-pin (PARA)
function)

Via the two RS-422A connectors, multiple DSR-DR1000/
DR1000P units can be connected in a cascade connection,
for simultaneous playback without delay. This is
convenient in situations such as output to multiple
monitors. To perform multi-simultaneous playback, you
need to set the REMOTE I/F menu item

(see page 74)

9PIN(PARA).

Other Features

Support for two i.LINK protocols

This unit supports the AV/C protocol, used for input and
output of digital video and audio signals in the DV format,
and the SBP2 protocol, used for high-speed transfer of
video and audio data. By connecting SBP2 compatible
nonlinear devices or servers, you can transfer data at fast
speed.

Ethernet modular jack

You can connect this unit to a LAN to transfer material.
This allows you to cut out any scene and transfer it.

Menu system for functionality and
operation settings

The unit provides a menu system to make its various
functions easier to use and set up its operation conditions.

Self-diagnostic/alarm function

This function automatically detects setup and connection
errors, operation faults, and other problems. It also
displays a description of the problem, its cause, and the

recommended response on the video monitor screen or
time counter display.

Internal test signal generator

The unit has built-in video and audio test signal generators.
The video test signal generator can produce either a color
bar signal or a black burst signal. The audio test signal
generator can generate either a silent signal or a 1-kHz sine
wave signal. Menu items are provided for selecting the test
signals to be generated.

Reference signal connection

The reference video input connector of the unit is provided
with a loop-through connector which can be used to
connect the input reference video signal to other
equipment. When there is no loop-through connection, the
reference video input connector is automatically provided
with a 75-ohm termination.

Compatible with wide-screen aspect ratio
(16:9)

The unit can record and play back aspect ratio information.
When video accompanied by wide-screen aspect ratio
information is recorded or played back, the unit can output
the video signal also containing the aspect ratio
information.