Sony DVF-EL100, Operating Instructions Manual

Parts Identification

4

Parts Identification

a

Tally indicator

This is located at the top of the unit’s internal screen.
This lights or blinks red or turns off according to the 
situation.

Lit:

 The camera/camcorder is recording.

Blinking:

 An error or warning has occurred.

For details on the status of the indicator, refer to the 
operating instructions for your camera/camcorder.

b

Eye sensor

c

Eyecup

d

Diopter adjustment ring

Turn the ring to adjust the diopter so that the image is 
clearly visible.

e

DISPLAY button

Displays markers and text information.
The display switches between display and hide with each 
press of the button.

f

SPARE button

Intended for future expansion. Not currently used.

g

FOCUS MAG (magnified display) button

Magnifies the height and width of the image (x2) for 
easier focus adjustment. This does not affect the camera’s 
output signal.
The display switches between magnified display and 
normal display with each press of the button.

h

VF connector (26-pin rectangular type)

Connect this to the VF connector on the camera using the 
supplied VF connection cable.

i

Rotation arm

Rotate the arm to adjust the position of the unit.

j

Arm lock knob

Use this when adjusting the forward/backward position 
and height of the unit.

k

L-arm

Attach this to the viewfinder shoe of the camera.
You can also slide the unit forward, backward, left, and 
right to adjust its position.

l

Slide stopper

Prevents this unit from detaching from the camera when 
sliding it left and right.

• Do not cover or block the eye sensor.
• To prevent screen burn-in on the OLED panel and 

extend the life of the panel, the colors in the display 
may be inverted or the image may not be displayed 
when your eye is not in contact with the eyepiece. This 
will not occur when the camera or camcorder is 
recording.

1

2

5

6

3

4

7

8

9

0

qa

qs

Notes