background image

Overview / Usage Notes

3

Overview

The DVF-L700 is a 7.0-inch color LCD viewfinder.
This unit has the following features.

High resolution and wide visual angle

The viewfinder uses a 7.0-inch Full HD resolution LCD 
panel for a resolution of 1920 × 1080 and a wide visual 
angle.

Stable picture

The LCD screen provides stable images without 
distortion, regardless of display’s brightness.

HIGH BRIGHT function

The ability to increase the brightness instantly improves 
visibility outdoors.

FOCUS MAG function

You can magnify the height and width of the image (x2) 
for easier focus adjustment.

False color function

Display signal levels using different colors. When you 
use the false color function, image signals are displayed 
in black and white, and colors are added based on the 
signal levels.

Tally indicator

The viewfinder is equipped with a single tally indicator 
(red) that lights in response to a tally signal.

Flexible operability

The three joints of the supplied flexible arm can be locked 
via a single knob, allowing you to adjust the position of 
the viewfinder for comfortable operation.

Usage Notes

Place of use

When using the viewfinder in low temperature 
environments, dynamic resolution levels may decrease 
during the period immediately after you turn on the 
power.

Condensation

If the unit is suddenly taken from a cold to a warm 
location, or if ambient temperature suddenly rises, 
moisture may form on the outer surface of the unit and/or 
inside of the unit. This is known as condensation. If 
condensation occurs, turn off the unit and wait until the 
condensation clears before operating the unit. Operating 
the unit while condensation is present may damage the 
unit.

LCD panel

The LCD panel fitted to this unit is manufactured with 
high precision technology, giving a functioning pixel 
ratio of at least 99.99%. Thus a very small proportion of 
pixels may be “stuck”, either always off (black), always 
on (red, green, or blue), or flashing. In addition, over a 
long period of use, because of the physical characteristics 
of the liquid crystal display, such “stuck” pixels may 
appear spontaneously. These problems are not a 
malfunction.

LCD image display

• Due to the physical characteristics of LCD panels, there 

may be a decrease in brightness or change in color 
temperature over a long period of use. These problems 
are not a malfunction.
In addition, these occurrences will not affect recorded 
data.

• If you leave the viewfinder displaying a still image for 

a long time, an afterimage may appear on the screen. 
Turn the power off if the viewfinder is not to be used for 
an extended period of time.

Maintenance

• Use a dust blower to remove dust from the screen.
• Do not use solvents such as thinner to clean the screen.

Summary of Contents for DVF-L700













Reviews: