Error Messages / Cleaning the Screen
9
Error Messages
Cleaning the Screen
When cleaning the viewfinder’s screen, remove the
viewfinder from the camera, and take care not to damage
the components.
For details on how to remove the viewfinder from the
camera, see “Detaching the Viewfinder” (page 7).
Removing dust from the surface of the screen
Use a dust blower.
Do not use thinner or other solvents.
After use in harsh environments
Be sure to perform the following maintenance after using
the viewfinder at dusty locations, beaches, hot springs, or
other harsh environments.
• Use an airbrush to carefully remove any dust or sand
from inside the viewfinder.
• Clean the contacts of the connectors.
• After performing the above maintenance, perform a
basic operation test and check that the viewfinder is
functioning properly.
Display
Description
VF TEMP HIGH
Temperature error
DEVICE ERROR
Device error other than the above
Note
Summary of Contents for DVF-L700
Page 12: ...Sony Corporation ...
