28
DVP-CX995V
2-8. Changer Mecha Check
On this test mode screen, selecting
[8]
enables the table sensor and
the disc sensor adjustment. The following screen appears.
Display when
[8]
is selected in the Drive Manual Operation
## Changer Mecha Check ##
ENTER : Mecha Initial
OP/CL : Disc Load/UnLoad
jogFOR : Table R StepTurn
jogPRV : Table L StepTurn
PLAY : Table Rotate
PAUSE : Mecha Adjust
DISP : Sensor Status
RETURN : Exit
All operations are the same as those of the Changer Manual Move
except
[OP/CL]
,
[PLAY]
and
[PAUSE]
.
[OP/CL]
: Loads the disc from the chucking position of
Disc Load/UnLoad
the table toward inside the mechanism deck
(
Z
key)
or from inside the mechanism deck to the
table.
When the Disc Load is selected a series of
operation starting from Door Close – Table
Rotate – Chucking is performed.
When the Disc UnLoad is selected a series of
operation starting from Unchucking – Table
Rotate – Door Open is performed.
[PLAY]
: Enters the Disc Sensor Adjustment Mode.
Table Rotate
The 400CHG Table Rotate appears on the
screen.
[PAUSE]
: Enters the Table Sensor Adjustment Mode.
Mecha Adjust
The 400CHG Mecha Adjust appears on the
screen.
Display when
[PLAY]
is selected in the Changer Mecha Check.
Note:
Refer to page 32 for “TABLE SENSOR ADJUSTMENT”.
## 400CHG Table Rotate ##
RIGHT : Turn Right
LEFT : Turn Left
Table 1/2/3/4 : X/X/X/X
Disc Sensor : XXX
RETURN : Exit
[RIGHT]
*
1
: Rotates table counterclockwise.
Turn Right
[LEFT]
*
1
: Rotates table clockwise.
Turn Left
Table 1/2/3/4
: These items are the same as those of the
Disc Sensor
400CHG Sensor Check.
*1) Turn the
[DISC/AMS]
knob on the main unit.
Display when
[PAUSE]
is selected in the Changer Mecha Check.
Note:
Refer to page 32 for “POP UP MECHANISM ADJUSTMENT”.
## 400CHG Mecha Adjust ##
UP : Load in
DOWN : Load out
RIGHT : Pop Up
LEFT : Pop Down
Table 1/2/3/4 : X/X/X/X
RETURN : Exit
[UP]
: Loads the disc from the chucking position of the
Load in
table toward inside the mechanism deck during
pressing the
[
Q
]
key.
[DOWN]
: Loads the disc from inside the mechanism deck to
Load out
the table during pressing the
[
q
]
key.
[RIGHT]
: Pops up the lever during pressing the
[
w
]
key.
Pop Up
[LEFT]
: Pops down the lever during pressing the
[
W
]
key.
Pop Down
Table 1/2/3/4 : This item is the same as that of the 400CHG Sensor
Check.
