MICROFILM
SERVICE MANUAL
AEP Model
UK Model
E Model
Hong Kong Model
Singapore Model
Australian Model
Chinese Model
CD/DVD PLAYER
DVP-F11
RMT-D109E/D109O
SPECIFICATIONS
CD/DVD player
Laser
Semiconductor laser
Signal format system
PAL/(NTSC)
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz
(±1 dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 110 dB (LINE OUT (AUDIO
1, 2) connectors only)
Harmonic distortion
Less than 0.0025%
Dynamic range
More than 100 dB (DVD)
More than 97 dB (CD)
Wow and flutter
Less than detected value
(±0.001% W PEAK)
Outputs and inputs
Jack
Output
Load impedance
type
level
LINE OUT
Phono
2 Vrms
Over 10 kilohms
(AUDIO1, 2)
jacks
(at 50 kilohms)
OPTICAL
Optical
–18 dBm
Wave length: 660 nm
output
connector
COAXIAL
Phono
0.5 Vp-p
75 ohms terminated
jack
LINE OUT
Phono
1.0 Vp-p
75 ohms,
(VIDEO1, 2)
jacks
sync negative
LINE OUT
4-pin
Y: 1.0 Vp-p
75 ohms,
(S-VIDEO1, 2)
mini DIN
sync negative
C: 0.3 Vp-p
75 ohms terminated
(PAL)
0.286 Vp-p
(NTSC)
LINE OUT
Phono
2 Vrms
Over 10 kilohms
(WOOFER OUT) jacks
PHONES
Phone
12 mW
32 ohms
jack
General
Power requirements
DC 10.5 V
Power consumption
13 W
Dimensions (approx.)
215
×
60
×
314 mm (w/h/d)
incl. projecting parts
Mass (approx.)
2.1 kg
Operating temperature
5
°
C to 35
°
C
Operating humidity
25% to 80%
AC power adaptor
Power requirements
220 to 240 V AC, 50/60 Hz
Power consumption
19 W
Output voltage
DC 10.5 V, 1.3 A in operating mode
Dimensions (approx.)
125
×
39
×
62 mm (w/h/d)
excl. projecting parts
Mass (approx.)
235 g
Operating temperature
5
°
C to 35
°
C
Storage temperature
–20
°
C to +60
°
C
Supplied accessories
• Audio/Video connecting cord (1)
• S video cord (1)
• AC power adaptor AC-F11 (1)
• AC power cord (1)
• Remote commander (remote) RMT-D109O (1)
(Except Hong Kong, Singapore and Chinese)
Remote commander (remote) RMT-D109E (1)
(Hong Kong, Singapore and Chinese)
• Size AA (R6) batteries (2)
• Stand (1)
• EURO AV adaptor (1)
(Except Hong Kong, Singapore, Australian and Chinese)
* The signals from LINE OUT (AUDIO1, 2) connectors are measured.
When you play the PCM sound tracks with 96 kHz sampling frequency,
the output signals from the OPTICAL and COAXIAL connectors are
converted to 48 kHz (sampling frequency).
Design and specifications are subject to change without notice.
Summary of Contents for DVP-F11
