18
Getting Started
DC IN 10.5V
WOOFER
OUT
R – AUDIO – L
VIDEO
S–VIDEO
1
2
OPTICAL
COAXIAL
PCM/DTS/
DOLBY DIGITAL (AC–3)
/MPEG
LINE OUT
S VIDEO
VIDEO
AUDIO
INPUT
L
R
CD
L
R
INPUT
2+1 Channel Surround Hookups
This connection is for listening to the sound through the
left and right speakers of the TV, or speakers connected to
a receiver and the subwoofer. You can enjoy rich bass
frequencies by connecting a subwoofer. Refer to the
instructions supplied with the component to be
connected.
Set “SUBWOOFER” in “SPEAKER SETUP” to “YES” in
the setup display (page 57). Then set “FRONT SPEAKER
SIZE” to “TV” when you use the TV’s speakers, or to
“LARGE,” “MIDDLE” or “SMALL” when you use the
speakers connected to the receiver.
z
You can enjoy surround sounds even if you connect front
speakers only
You can use 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using actual
rear speakers (Virtual Enhanced Surround). For details, see page
39.
Required cords
Audio connecting cord (not supplied) (1)
S video cord (supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
Monaural audio cord (not supplied) (1)
One for a subwoofer
White (L)
Red (R)
White (L)
Red (R)
CD/DVD player
To LINE
OUT
(AUDIO)
TV
: Signal flow
Receiver (Amplifier)
To audio input
To an AC outlet
To LINE OUT (S-VIDEO)
To S VIDEO input
Note
You cannot enjoy the picture with S video signal if your TV does
not conform to the S video signal. When your TV does not have
an S VIDEO input, connect the component via the VIDEO INPUT
connector using the video connecting cord (not supplied) instead
of the S video cord. For details, see page 14.
Refer to the instructions supplied with your TV.
To WOOFER
OUT
AC power adaptor
(supplied)
Subwoofer
(Active type)
or
To audio input
AC power cord
(supplied)