28
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Press
[
/
1
.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
4
Press
Z
on the player, and place a
disc on the disc tray.
Make sure the disc is held by the groove
on the tray.
Make sure the disc is held within the
groove of the tray when using the player
in the upright position also.
5
Press
H
.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 31. For VIDEO CDs,
see page 33.
To turn off the player
Press
[
/
1
. The player enters standby mode.
z
Hint
For European models
The player will turn off automatically whenever
you leave it in stop mode for more than 30 minutes
(Auto Power Off function) (page 65).
DISPLAY
POSITION
Z
[
/
1
N
Playback side facing
the disc tray
Summary of Contents for DVP-F250
Page 1: ...3 083 976 11 2 Operating Instructions 2003 Sony Corporation DVP F250 CD DVD Player ...
Page 77: ......
Page 78: ......
Page 79: ......
