Sony DVP-K370 Service Manual Download

Page: 14 / 106

1-6

Connecting to an AV amplifier (receiver) with a digital input jack having

a Dolby Digital, MPEG audio or DTS decoder and 6 speakers

This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver). You are unable to enjoy the surround sound effects of this
player.

Note

After you have completed the connection, be sure to
set “ DOLBY DIGITAL”  to “ DOLBY DIGITAL”
and “ DTS”  to “ ON”  in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “ MPEG”  to “ MPEG”  (page
70).

PCM/DTS/MPEG
DOLBY DIGITAL

COAXIAL

OPTICAL

AUDIO

VIDEO

DIGITAL OUT

LINE OUT

S VIDEO

OUT

COMPONENT

VIDEO OUT

PCM/DTS/MPEG
DOLBY DIGITAL

COAXIAL

OPTICAL

DIGITAL OUT

Front (R)

Front (L)

Rear (R)

AV amplifier (receiver) having
a decoder

Subwoofer

Center

Coaxial digital cord
(not supplied)

Optical digital cord
(not supplied)
Remove jack cap
before connecting

[Speakers]

CD/DVD player

: Signal flow

[Speakers]

Rear (L)

to optical digital input

to coaxial digital
input

to DIGITAL OUT
(COAXIAL or
OPTICAL)

ook

up
s

Step 3: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet (mains).

Step 4: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press

. To return to the previous adjustment, press

Turn on the TV.

Press

[

Switch the input selector on your
TV so that the signal from the

player appears on the TV screen.

“ Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“ QUICK” under “ SETUP” in the Control
Menu to run Quick Setup (page 65).

Press ENTER without inserting a

disc.

The Setup Display for selecting the
language used in the on-screen display
appears.

Press

to select a language.

The player uses the language selected
here to display the menu and subtitles as
well.

Press ENTER.

The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.

Press

to select the setting that

matches your TV type.

◆

If you have a wide-screen TV or a 4:3

standard TV with a wide-screen mode

• 16:9 (page 66)

◆

If you have a 4:3 standard TV

• 4:3 LETTER BOX or 4:3 PAN SCAN

(page 66)

Press ENTER.

The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.

ENTER

[

LANGUAGE SETUP

OSD:
MENU:
AUDIO:
SUBTITLE:

CHINESE1

ENGLISH
ENGLISH

CHINESE2

SCREEN SETUP

TV TYPE:
COLOR SYSTEM:
SCREEN SAVER:

16:9

4:3 LETTER BOX

BACKGROUND:

4:3 PAN SCAN

16:9

continued

Press

to select the type of jack

(if any) you are using to connect to
an amplifier (receiver), then press

ENTER.

Choose the item that matches the audio
connection you selected on pages 21 to
24 (

through

• If you connect just a TV and nothing

else, select “ NO.” Quick Setup is
finished and connections are complete.

• Select “ LINE OUTPUT L/R

(AUDIO).” Quick Setup is finished and
connections are complete.

• Select “ DIGITAL OUTPUT.” The Setup

Display for “ DOLBY DIGITAL” appears.

Press

to select the type of

Dolby Digital signal you wish to
send to your amplifier (receiver).

Choose the signal that matches the audio
connection you selected on pages 22 to
24 (

through

• D-PCM (page 70)

• DOLBY DIGITAL (only if the

amplifier (receiver) has a Dolby Digital
decoder) (page 70)

Press ENTER.

“ DTS” is selected.

Press

to select whether or

not you wish to send a DTS signal

to your amplifier (receiver).

Choose the item that matches the audio
connection you selected on pages 22 to
24 (

through

• OFF (page 70)

• ON (only if the amplifier (receiver) has

a DTS decoder) (page 70)

Press ENTER.

Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, adjust the
“ MPEG” setting (page 70).

Enjoying the surround sound
effects

To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 (

through

). Each of these is the

default setting and does not need to be adjusted
when you first connect the player. Refer to
page 64 for using the Setup Display.

Audio Connection (pages 21 to 24)

• No additional settings are needed.

• Set “ DOWNMIX” to “ DOLBY

SURROUND” (page 69)

YES

Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.

LINE OUTPUT L/R (AUDIO)

DIGITAL OUTPUT

B-1