F:\SONY DVD\2665121E31K56PRU3\SOURCE\2665121E31\01GB13ADV3-CEK.fm
master page=left
58
DVP-K56P
2-665-121-
E2
(1)
Controlling Your TV with
the Supplied Remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
You can control your TV using the buttons
below.
Note
Depending on the connected unit, you may not be
able to control your TV using all or some of the
buttons on the supplied remote.
Controlling other TVs with the
remote
You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
1
While holding down TV
[
/
1
, press the
number buttons to select your TV’s
manufacturer’s code (see the table
below).
2
Release TV
[
/
1
.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Notes
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
• Depending on the connected unit, you may not be
able to control your TV using all or some of the
buttons on the supplied remote.
By pressing
You can
TV
[
/
1
Turn the TV on or off
2
(volume) +/– Adjust the volume of the TV
t
(TV/video)
Switch the TV’s input source
between the TV and other
input sources.
TV
2
(volume) +/–
t
(TV/video)
Number
buttons
Manufacturer
Code number
Sony
01 (default)
Aiwa
01 (default)
Grundig
11
Hitachi
24
JVC
33
LG
06
Loewe
06
Panasonic
17, 49
Philips
06, 08
Samsung
06, 71
Sanyo
25
Sharp
29
Thomson
43
Toshiba
38
01GB01COV.book Page 58 Wednesday, July 12, 2006 4:36 PM