19
H
ook
up
s
A
Connecting to audio L/R input
jacks
This connection will use your TV’s or stereo
amplifier’s (receiver’s) two speakers for
sound. Connect using the audio/video cord
(not supplied).
• Surround effect (page 46)
TV: Dynamic Theatre, Dynamic, Wide,
Night
Stereo amplifier (receiver): Standard, Night
B
Connecting to a digital audio
input jack
If your AV amplifier (receiver) has a Dolby
Digital*
1
, DTS*
2
, or MPEG audio decoder
and a digital input jack, use this connection.
Connect using a coaxial or optical digital cord
(not supplied).
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG
audio (5.1ch)
*1
Manufactured under license from Dolby
Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol
are trademarks of Dolby Laboratories.
*2
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 20).
If your AV amplifier (receiver) has an MPEG
audio decoder function, set “MPEG” to “MPEG”
in AUDIO SETUP (page 71). Otherwise, no
sound or a loud noise will come from your
speakers.
• The surround sound effects of this player cannot
be used with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 20).
Yellow
White (L)
Red (R)
Yellow
White (L)
Red (R)
Coaxial cord
Optical cord
,
continued