Sony DVP-K880D Operating Instructions Manual Download

Page: 12 / 76

Getting Started

5.1 Channel Surround Hookups

Some DVDs have a sound track with up to 5.1 channels
recorded in Dolby* Digital or MPEG AUDIO format.
Using a receiver (amplifier) having 5.1 channel inputs and
the 5 (+1) speakers, you can enjoy more real audio
presence in the comfort of your own home.
“5 channel” stands for the 2 front speakers (Left and
Right), 2 rear speakers (Left and Right) and 1 center
speaker. The “0.1 channel” (+1) stands for the subwoofer
which outputs the bass.
Even if you have fewer than 5 (+1) speakers, the player
distributes the output signal to the speakers appropriately.
This player has VIRTUAL 3D SURROUND mode.
You can use the 3D sound imaging to shift the sound of
the rear speakers away from the actual speaker position
(VIRTUAL REAR SHIFT) or to create 3 sets of virtual rear
speakers from 1 set of actual rear speakers (VIRTUAL
MULTI REAR). For details on the VIRTUAL 3D
SURROUND mode, see page 34.

Note

When a DVD has a sound track with 7.1 channels recorded in
MPEG AUDIO format, the output audio signals are mixed down
to 5.1 channels.

Speaker placement

For the best possible surround sound, we recommend the
following conditions.
• Use higher performance speakers.
• Use rear and center speakers that match your front

speakers in size and performance.

• All speakers should be the same distance from the

listening position.

• Place the subwoofer between the front (L, R) speakers if

possible.

Note

Do not place the center or rear speakers farther away from the
listening position than the front speakers.

Required cords

Audio cords (not supplied)

Two for the 5.1CH OUTPUT FRONT and REAR jacks

Monaural audio cords (not supplied)

Two for the 5.1CH OUTPUT CENTER and WOOFER jacks

S video cord (supplied)

One for the S VIDEO OUT jacks

Notes

• Do not connect the power cord to an AC outlet or press

the POWER switch before completing all connections.

• The cord connectors should be fully inserted into the

jacks. Loose connection may cause hum and noise.

• Jacks and plugs of the connecting cords are color-coded

as follows:
Red jacks and plugs: Right audio channel
White jacks and plugs: Left audio channel
You can use either red or white cables to connect the
center speaker and subwoofer.

• When you connect the component via the DIGITAL

OUT OPTICAL or COAXIAL connector using an optical
or coaxial digital connecting cord (not supplied), see
page 11.

Setups for the player

Some setups are necessary for the player depending on
the components to be connected.
Use the setup display or the Control Menu display to
change the various settings.
For details on using the setup display, see page 47.
For details on enjoying Digital Cinema Sound, see page
34.

•

To enjoy Dolby Digital or MPEG AUDIO surround
sound by connecting the player to a receiver
(amplifier) with 5.1 ch inputs

Set each speaker position or distance, etc. See page 59.

* Manufactured under license from Dolby Laboratories.

“Dolby”, “AC-3”, “Pro Logic” and the double-D symbol

are

trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby
Laboratories, Inc. All rights reserved.

White (L)

Red (R)

White (L)

Black