23
H
ook
up
s
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver).
z
Hint
Use connection
when connecting to 7 or
more speakers (6.1 ch or more).
Note
After you have completed the connection, be sure to
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” in Quick Setup (page 24). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “MPEG” to “MPEG”
(page 67). Otherwise, no sound or a loud noise will
come from the speakers.
D
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
OPTICAL
LINE OUT
R-AUDIO-L
VIDEO
S VIDEO
OUT
CR
Y
COMPONENT VIDEO OUT
CB
LINE (RGB) -TV
D
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
OPTICAL
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer
Centre
Coaxial digital cord
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
CD/DVD player
l
: Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital input
to DIGITAL OUT
(COAXIAL or OPTICAL)
D
,
continued