1-5
22
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
OPTICAL
LINE OUT
R-AUDIO-L
VIDEO
S VIDEO
OUT
CR
Y
COMPONENT VIDEO OUT
CB
LINE (RGB) -TV
C-2
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
OPTICAL
LINE OUT
R-AUDIO-L
VIDEO
C-1
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
l
: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Centre
Rear (mono)
Stereo
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(red)
(white)
to coaxial or optical digital
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICA
L)
23
Hook
up
s
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver).
z
Hint
Use connection
when connecting to 7 or
more speakers (6.1 ch or more).
Note
After you have completed the connection, be sure to
set
to
and DTS to ON in Quick Setup (page 24). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set MPEG to MPEG
(page 67). Otherwise, no sound or a loud noise will
come from the speakers.
D
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
OPTICAL
LINE OUT
R-AUDIO-L
VIDEO
S VIDEO
OUT
CR
Y
COMPONENT VIDEO OUT
CB
LINE (RGB) -TV
D
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
OPTICAL
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer
Centre
Coaxial digital cord
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
CD/DVD player
l
: Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital input
to DIGITAL OUT
(COAXIAL or OPTICAL)
D
,
continued
DOLBY DIGITAL
DOLBY DIGITAL
24
Step 5: Connecting the Mains Lead
Plug the player and TV mains lead (power cord) into a mains.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press
>
. To return to the previous adjustment, press
.
.
1
Turn on the TV.
2
Press
[
/
1
.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
Press [ENTER] to run QUICK SETUP
appears at the bottom of the screen. If this
message does not appear, select
under SETUP in the Control
Menu to run Quick Setup (page 63).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
The available languages differ depending
upon the player model.
5
Press
X
/
x
to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
7
Press
X
/
x
to select the setting that
matches your TV type.
◆
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
¥ 16:9 (page 64)
ENTER
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
ITALIANO
ESPA OL
NEDERLANDS
DANSK
SVENSKA
FRAN AIS
ENGLISH
ENGLISH
DEUTSCH
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
16:9
4:3 LETTER BOX
LINE:
4:3 PAN SCAN
16:9
QUICK
25
Hookups
◆
If you have a 4:3 standard TV
4:3 LETTER BOX or 4:3 PAN SCAN
(page 64)
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
9
Press
X
/
x
to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
If you set LINE to
the player
does not output component video signals
from COMPONENT VIDEO OUT jacks.
◆
Video signals
VIDEO (page 64)
◆
S video signals
S VIDEO (page 64)
◆
RGB signals
RGB (page 64)
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
11
Press
X
/
x
to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
connection you selected on pages 20 to
23 (
through ).
If you connect just a TV and nothing
else, select NO. Quick Setup is
finished and connections are complete.
Select LINE OUTPUT L/R
(AUDIO). Quick Setup is finished and
connections are complete.
Select DIGITAL OUTPUT. The
Setup Display for DOLBY DIGITAL
appears.
12
Press
X
/
x
to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 21 to
23 (
through ).
D-PCM (page 67)
DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 67)
13
Press ENTER.
DTS is selected.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
LINE:
VIDEO
VIDEO
S VIDEO
RGB
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
A
D
A
B-1
C-1
B-2
C-2
D
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DTS:
DOLBY DIGITAL
D-PCM
B-2
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
DTS:
OFF
OFF
ON
,
continued
RGB,
