1-3
14
z
Hint
The Control Menu icon indicator lights up in green
when you select any item
except
( TVS,
A-B REPEAT,
only).
The ANGLE indicator lights up in green only
when the angles can be changed. The CUSTOM
PICTURE MODE indicator lights up in green
when any setting other than STANDA RD is
selected.
PROGRAM (page 35)
Selects the title, chapter, or track to play in the order you want.
SHUFFLE (page 36)
Plays the title, chapter, or track in random order.
REPEAT (page 37)
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/
track/album repeatedly.
A-B REPEAT (page 38)
Specifies the parts you want to play repeatedly.
BNR (page 53)
Adjusts the picture quality by reducing the block noise or mosaic like patterns that
appear on your TV screen.
CUSTOM PICTURE MODE (page 54)
Adjusts the video signal from the player. You can select the picture quality that best
suits the programme you are watching.
DIGITAL VIDEO ENHANCER (page 55)
Exaggerates the outline of the image to produce a sharper picture.
PICTURE NAVIGATION (page 43)
Divides the screen into 9 subscreens to help you find the scene you want quickly.
t
OFF.
PROGRAM,
SHUFFLE,
REPEAT,
BNR,
DIGITAL VIDEO ENHANCER
15
Hookups
Hookups
Hooking Up the Player
Follow steps 1 to 6 to hook up and adjust the settings of the player.
Notes
Plug cords securely to prevent unwanted noise.
Refer to the instructions supplied with the components to be connected.
You cannot connect this player to a TV that does not have a SCART (EURO AV) or video input jack.
Be sure to disconnect the mains lead of each component before connecting.
Step 1: Unpacking
Check that you have t
he following items:
Audio/video cord (pinplug
×
3
y
pinplug
×
3) (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Step 2: Inserting Batteries into the Remote
You can control the player using the supplied remote. Insert two R6 (size AA) batteries by
matching the
3
and
#
ends on the batteries to the markings inside the compartment. When
using the remote, point it at the remote sensor on the player.
Notes
Do not leave the remote in an extremely hot or humid place.
Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a
malfunction.
If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
,
continued
16
Step 3: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns
A
through
D
, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
LINE OUT
R-AUDIO-L
VIDEO
S VIDEO
OUT
CR
Y
COMPONENT VIDEO OUT
CB
LINE (RGB) -TV
C
R
C
B
Y
COMPONENT
VIDEO IN
D
A
INPUT
S VIDEO
C
B
AUDIO
INPUT
L
R
VIDEO
Audio/video
cord (supplied)
Component video
cord (not supplied)
(yellow)
TV, projector, or AV
amplifier (receiver)
CD/DVD player
TV, projector, or AV
amplifier (receiver)
(green)
S VIDEO cord
(not supplied)
TV, projector, or AV
amplifier (receiver)
(red)
(blue)
(yellow)
(green)
(blue)
(red)
to LINE OUT (VIDEO)
to COMPONENT
VIDEO OUT
to S VIDEO OUT
SCART (EURO AV)
cord (not supplied)
to LINE (RGB)-TV
TV
l
: Signal fl
ow
17
Hookups
A
If you are connecting to a SCART (EURO AV) input jack
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly
to avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the
TV conforms to S video or RGB signals. Refer to the operating instructions supplied with the
TV to be connected. Also, when you set LINE to S VIDEO or
under SCREEN
SETUP in the Setup Display (page 64), use a SCART (EURO AV) cord that conforms to each
signal.
B
If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. Yo u will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 20). (Do this if you are
connecting to a TV only.)
C
If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). Yo u will enjoy high quality images.
D
If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, C
B
, C
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images. Note that if you set LINE to
in SCREEN SETUP (page 24, 64), the player does not output component video signals
from COMPONENT VIDEO OUT jacks.
Yellow
White (L)
Red (R)
Yellow
White (L)
Red(R)
Green
Blue
Red
Green
Blue
Red
,
continued
RGB
RGB
