83
Set
tin
g
s an
d Adj
u
st
m
ent
s
Notes
• If your TV does not accept S video or the RGB
signals, no picture will appear on the TV screen,
even if you select “S VIDEO” or “RGB.” Refer to
the instructions supplied with your TV.
• When you select “RGB,” you cannot use the
PROGRESSIVE button or the COMPONENT
VIDEO OUT jacks.
◆
4:3 OUTPUT
This setting is effective only when you set
“TV TYPE” in “SCREEN SETUP” to
“16:9.”
Adjust to watch 4:3 aspect ratio progressive
signals. If you can change the aspect ratio on
your progressive format (525p/625p)
compatible TV, change the setting on your
TV, not the player. This setting is effective
only when “PROGRESSIVE AUTO” or
“PROGRESSIVE VIDEO” is selected by
using the PROGRESSIVE button on the front
panel.
Custom Settings
(CUSTOM
SETUP)
Use this to set up playback related and other
settings.
Select “CUSTOM SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 80).
The default settings are underlined.
◆
AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
◆
DISPLAY (DVP-NS955V only)
Adjusts the lighting of the front panel display.
FULL
Select this when you can
change the aspect ratio on your
TV.
NORMAL
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left
and right sides of the image.
16:9 aspect ratio TV
OFF
Switches this function off.
ON
Automatically starts playback
when the player is turned on by
a timer (not supplied).
BRIGHT
Makes the lighting bright.
DARK
Makes the lighting dark.
AUTO
DARK
Makes the lighting dark if you
do not operate the player or
remote for a short while.
AUTO OFF
Turns off the lighting if you do
not operate the player or remote
for a while.
OFF
(FL OFF)
Turns off the lighting.
CUSTOM SETUP
AUTO PLAY:
DISPLAY:
OFF
BRIGHT
ON
PLAYBACK MEMORY:
AUTO
PAUSE MODE:
OFF
TRACK SELECTION:
ON
MULTI-DISC RESUME:
Registration Code
DivX:
,
continued
