Sony DVP-NC60P - Cd/dvd Player Service Manual Download

Page: 21 / 86

1-17

DVP-NC60P

Additional Informat

ion

Additional Information

Troubleshooting

If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer (For customers in the USA only).

Power

The power is not turned on.

Check that the power cord is connected
securely.

Picture

There is no picture/picture noise appears.

Re-connect the connecting cord securely.

The connecting cords are damaged.

Check the connection to your TV (page 17)
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.

The disc is dirty or flawed.

If the picture output from your player goes
through your VCR to get to your TV or if
you are connected to a combination TV/
VIDEO player, the copy-protection signal
applied to some DVD programs could affect
picture quality. If you still experience
problems even when you connect your
player directly to your TV, try connecting
your player to your TV’s S VIDEO input
(page 17).

You have selected “PROGRESSIVE
AUTO” or “PROGRESSIVE VIDEO”
using the PROGRESSIVE button on the
front panel (the PROGRESSIVE indicator
lights up) even though your TV cannot
accept the progressive signal. In this case,
select “NORMAL (INTERLACE)” so that
the PROGRESSIVE indicator turns off.

Even if your TV is compatible with
progressive format 480p signals, the image
may be affected when you set the player to
progressive format. In this case, select
“NORMAL (INTERLACE)” using the
PROGRESSIVE button on the front panel
so that the PROGRESSIVE indicator turns
off and the player is set to normal (interlace)
format.

The picture does not fill the screen, even
though the aspect ratio is set in “TV TYPE”
under “SCREEN SETUP.”

The aspect ratio of the disc is fixed on your
DVD.

Sound

There is no sound.

Re-connect the connecting cord securely.

The connecting cord is damaged.

The player is connected to the wrong input
jack on the amplifier (receiver) (page 17).

The amplifier (receiver) input is not
correctly set.

The player is in pause mode or in Slow-
motion Play mode.

The player is in fast forward or fast reverse
mode.

If the audio signal does not come through
the DIGITAL OUT (OPTICAL or
COAXIAL) jack, check the audio settings
(page 66).

While playing a Super VCD on which the
audio track 2 is not recorded, no sound will
come out when you select “2:STEREO,”
“2:1/L,” or “2:2/R.”

Sound distortion occurs.

Set “AUDIO ATT” in “AUDIO SETUP” to
“ON” (page 65).

The sound volume is low.

The sound volume is low on some DVDs.
The sound volume may improve if you set
“AUDIO DRC” in “AUDIO SETUP” to
“TV MODE” (page 65).

Set “AUDIO ATT” in “AUDIO SETUP” to
“OFF” (page 65).

continued

Operation

The remote does not function.

The batteries in the remote are weak.

There are obstacles between the remote and
the player.

The distance between the remote and the
player is too far.

The remote is not pointed at the remote
sensor on the player.

The disc does not play.

The disc is turned over.
Insert the disc with the playback side facing
down.

The disc is skewed.

The player cannot play certain discs
(page 8).

The region code on the DVD does not match
the player.

Moisture has condensed inside the player
(page 5).

The player cannot play a recorded disc that
is not correctly finalized (page 8).

The MP3 audio track cannot be played
(page 50).

The DATA CD is not recorded in an MP3
format that conforms to ISO 9660 Level 1/
Level 2 or Joliet.

The DATA DVD is not recorded in MP3
format that conforms to UDF (Universal
Disk Format).

The MP3 audio track does not have the
extension “.MP3.”

The data is not formatted in MP3 even
though it has the extension “.MP3.”

The data is not MPEG-1 Audio Layer III
data.

The player cannot play audio tracks in
mp3PRO format.

“MODE (MP3, JPEG)” is set to “IMAGE
(JPEG)” (page 53).

The JPEG image file cannot be played
(page 50).

The DATA CD is not recorded in a JPEG
format that conforms to ISO 9660 Level 1/
Level 2, or Joliet.

The DATA DVD is not recorded in JPEG
format that conforms to UDF (Universal
Disk Format).

The file has an extension other than
“.JPEG” or “.JPG.”

The image is larger than 3072 (width)

2048 (height) in normal mode, or more than
3,300,000 pixels in progressive JPEG.
(Some progressive JPEG files cannot be
displayed even if the file size is within this
specified capacity.)

The image does not fit the screen (the image
is reduced).

“MODE (MP3, JPEG)” is set to “AUDIO
(MP3)” (page 53).

The MP3 audio tracks and JPEG image
files start playing simultaneously.

“MODE (MP3, JPEG)” is set to “AUTO”
(page 53).

The album/track/file names are not
displayed correctly.

The player can only display numbers and
alphabet. Other characters are displayed as
“*”.

The disc does not start playing from the
beginning.

Program Play, Shuffle Play, Repeat Play, or
A-B Repeat Play is selected (page 30).

Resume play has taken effect (page 27).

The player starts playing the disc
automatically.

The disc features an auto playback function.

“AUTO PLAY” in “CUSTOM SETUP” is
set to “ON” (page 64).

Playback stops automatically.

While playing discs with an auto pause
signal, the player stops playback at the auto
pause signal.

Some functions such as Stop, Search, Fast
Play, Slow Play, Slow-motion Play,
Repeat Play, Shuffle Play, or Program
Play cannot be performed.

Depending on the disc, you may not be able
to do some of the operations above. Refer to
the operating manual that comes with the
disc.

Additional Informat

ion

The language for the sound track cannot
be changed.

Try using the DVD’s menu instead of the
direct selection button on the remote
(page 28).

Multilingual tracks are not recorded on the
DVD being played.

The DVD prohibits the changing of the
language for the sound track.

The subtitle language cannot be changed
or turned off.

Try using the DVD’s menu instead of the
direct selection button on the remote
(page 28).

Multilingual subtitles are not recorded on
the DVD being played.

The DVD prohibits the changing of
subtitles.

The angles cannot be changed.

Try using the DVD’s menu instead of the
direct selection button on the remote
(page 28).

Multi-angles are not recorded on the DVD
being played.

The angle can only be changed when the
“

” indicator lights up on the front panel

display (page 11).

The DVD prohibits changing of the angles.

The player does not operate properly.

When static electricity, etc., causes the
player to operate abnormally, unplug the
player.

5 numbers or letters are displayed on the
screen and on the front panel display.

The self-diagnosis function was activated.
(See the table on page 70.)

The disc tray does not open and “LOCKED”
appears on the front panel display.

Child Lock is set (page 26).

The disc tray does not open and “TRAY
LOCKED” appears on the front panel
display.

Contact your Sony dealer or local
authorized Sony service facility.

“Data error” appears on the TV screen
when playing a DATA CD/DATA DVD.

The MP3 audio track/JPEG image file you
want to play is broken.

The data is not MPEG-1 Audio Layer III
data.

The JPEG image file format does not
conform to DCF (page 49).

The JPEG image file has the extension
“.JPG” or “.JPEG,” but is not in JPEG
format.

Self-diagnosis Function

(When letters/numbers appear in the

display)

When the self-diagnosis function is activated
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen and the front panel
display. In this case, check the following
table.

Glossary

Album (page 49, 51)

A unit in which to store JPEG image files or
MP3 audio tracks on a DATA CD/DATA
DVD. (“Album” is an exclusive definition for
this player.)

Chapter (page 11)

Sections of a picture or a music feature that
are smaller than titles. A title is composed of
several chapters. Depending on the disc, no
chapters may be recorded.

Dolby Digital (page 20, 66)

Digital audio compression technology
developed by Dolby Laboratories. This
technology conforms to multi-channel
surround sound. The rear channel is stereo
and there is a discrete subwoofer channel in
this format. Dolby Digital provides the same
discrete channels of high quality digital audio
found in “Dolby Digital” theater surround
sound systems. Good channel separation is
realized because all of the channel data is
recorded discretely and little deterioration is
realized because all channel data processing
is digital.

DTS (page 20, 66)

Digital audio compression technology that
Digital Theater Systems, Inc. developed. This
technology conforms to multi-channel
surround sound. The rear channel is stereo
and there is a discrete subwoofer channel in
this format. DTS provides the same discrete
channels of high quality digital audio.
Good channel separation is realized because
all of the channel data is recorded discretely
and little deterioration is realized because all
channel data processing is digital.

DVD VIDEO (page 7)

A disc that contains up to 8 hours of moving
pictures even though its diameter is the same
as a CD.
The data capacity of a single-layer and single-
sided DVD is 4.7 GB (Giga Byte), which is 7
times that of a CD. The data capacity of a
double-layer and single-sided DVD is 8.5
GB, a single-layer and double-sided DVD is

First three
characters of
the service
number

Cause and/or corrective
action

C 13

The disc is dirty or recorded
in a format that this player
cannot play (page 8).

Clean the disc with a soft
cloth or check its format
(page 2).

C 31

The disc is not inserted
correctly.

Re-insert the disc
correctly.

E XX

(xx is a number)

To prevent a malfunction, the
player has performed the
self-diagnosis function.

Contact your nearest
Sony dealer or local
authorized Sony service
facility and give the 5-
character service number.
Example: E 61 10