6-23
3-1-5. Terminating the aging operation
The aging operation terminates when the following conditions are
satisfied.
• The aging is performed for the set number of times.
• The aging is terminated as
[STOP]
or
[RETURN]
is pressed.
• An abnormality occurs in mechanism.
When the aging operation ends normally, table is opened and the
following menu appears.
When you press
[RIGHT]
, the tray moves in the direction of Disc
1. When you press
[LEFT]
, the tray moves in the direction
of Disc Number –1. Press
[ENTER]
to terminate the aging mode
after tray is closed and chucked.
If any abnormality occurs during the aging mode, the aging operation
is stopped and the following menu appears.
*1 indicates the mechanical part where error occurs.
*2 shows the mode when error occurs.
3-1-3. Setting disc
When the number of times of aging is set, the table is opened and
the following menu appears. Set a test disc while the following menu
is displayed.
When you press
[RIGHT]
, the tray moves in the direction of Disc
Number +1. When you press
[LEFT]
, the tray moves in the direction
of Disc Number –1. Press
[ENTER]
to start aging.
3-1-4. While aging is in progress
While aging is in progress, the following screen appears.
Max Count indicates the number of times of aging. Now Count
indicates the present number of times of aging. Disc Number
indicates the disc number of the present chucking position.
The indication “DVD SL 12cm” under the Disc Number indicates
the disc type when disc check is performed.
In addition to it, the following contents are displayed on the FL
display tube.
“A” indicates the aging mode.
1: All (DiscCheck On)
2: All (DiscCheck Off)
3: Table
4: Tray
“B” indicates the aging operation. (Disc number is displayed
during the Tray aging mode.)
1: Table Close
2: Chuck Up
3: DiscCheck
4: Table ExOpen
5: Tray ExMove
6: Table ExClose
7: Chuck Down
8: Table Open
“C” indicates the number of times of aging.
If you press
[STOP]
or
[RETURN]
during aging, the aging operation
is terminated. If you press
[PAUSE]
during aging, the aging operation
is paused. Pressing any key resumes the aging operation.
### Mecha Aging ###
Please Select Aging Mode
ENTER : Aging Start
RIGHT : Disc Skip (Wed)
LEFT
: Disc Skip (Rvs)
_
Exit: RETURN
### Mecha Aging ###
STOP
: Aging Stop
MaxCount
: 50000
NowCount
: 1
Disc Number : 1
DVD SL 12cm
Exit: RETURN
A
B –
C
### Mecha Aging ###
STOP
: Aging Stop
MaxCount
: 50000
NowCount
: 50000
Disc Number
: 1
DVD SL 12cm
ENTER
: Exit
RIGHT
: Disc Skip (Wed)
LEFT
: Disc Skip (Rvs)
_
Exit: RETURN
### Mecha Aging ###
STOP
: Aging Stop
MaxCount
: 50000
NowCount
: 1
Disc Number : 1
DVD SL 12cm
Table Error! (*1)
Table Close Error! (*2)
Push Any Key
_
Exit: RETURN
Summary of Contents for DVP-NC625
Page 10: ... 10 DVP NC625 NC665P MEMO 10E ...
Page 114: ...7 6E MEMO ...
