17
H
ook
up
s
B
If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C
If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y/C
B
/C
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 63.
To change the colour system
The colour system of the player is set to NTSC or PAL. If the on-screen display of the player
does not appear on the TV, change the colour system of the player (PAL or NTSC) so that a
picture appears on your TV. To change the colour system, hold
[
/
1
down for a few seconds
while pressing
X
on the player.
Notes
• Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear
image on the TV screen. If your TV only has one audio/video input jack, connect the player to this jack.
Red
Green
Blue
Red
Green
Blue
VCR
CD/DVD player
TV
Connect
directly