18
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to
avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV
conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to
be connected.
Also, when you set “LINE” to “S VIDEO” or “RGB” under “CUSTOM SETUP” in the Setup
Display (page 59), use a SCART (EURO AV) cord that conforms to each signal.
Connect the yellow plugs of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 19).
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
Notes
•
Do not connect your player to a VCR. You may not receive a clear image on the TV screen if you pass the player
signals via the VCR.
•
When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set to the
player automatically when you start playback or press any button except for POWER on the player or
[
/
1
on the
remote. If you wish to watch TV, press TV/DVD on the remote to return the input to the TV.
A
If you are connecting to a SCART (EURO AV) input jack
B
If you are connecting to a video input jack
C
If you are connecting to an S VIDEO input jack
When you play a disc recorded in the NTSC colour system, the player outputs the video signal or the setup
display, etc., in the NTSC colour system and the picture may not appear on PAL colour system televisions.
In this case, open the tray and remove the disc.
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
VCR
CD/DVD player
TV
Connect directly
Summary of Contents for DVP-NS300
Page 1: ...Operating Instructions 3 069 729 11 1 CD DVD Player DVP NS300 2001 Sony Corporation ...
Page 74: ......
Page 75: ......
Page 76: ...Sony Corporation ...