P
lay
in
g
Disc
s
31
Notes on playing DTS sound tracks on
a CD
•
When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
•
Set the sound to “STEREO” using the
(audio) button when you play DTS
sound tracks on a CD (page 44).
•
Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL) jack even if
“DTS” in “AUDIO SETUP” is set to “OFF”
in the Setup Display (page 62), and may
affect your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS
sound track
•
DTS audio signals are output only through
the DIGITAL OUT (COAXIAL) jack.
•
If you connect the player to audio
equipment without a DTS decoder, do not
set “DTS” to “ON” in “AUDIO SETUP”
(page 62). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
•
When you play a DVD with DTS sound
tracks, set “DTS” to “ON” in “AUDIO
SETUP” (page 62).
Note
If you don’t operate the player or the remote for more
than 30 minutes when a disc is not playing, the player
automatically enters standby mode (Auto Power Off
function).
Additional operations
To
Operation
Stop
Press
x
Pause
Press
X
Resume play after
pause
Press
X
or
H
Go to the next chapter,
track, or scene in
continuous play mode
Press
>
Go back to the
preceding chapter,
track, or scene in
continuous play mode
Press
.
Stop play and remove
the disc
Press
Z
H
.
/
>
Z
x
X
Summary of Contents for DVP-NS300
Page 1: ...Operating Instructions 3 069 729 11 1 CD DVD Player DVP NS300 2001 Sony Corporation ...
Page 74: ......
Page 75: ......
Page 76: ...Sony Corporation ...
