62
x
DIGITAL OUT
Selects if audio signals are output via the
DIGITAL OUT (COAXIAL) jack.
Switches the method of outputting audio
signals when you connect the following
component using a coaxial digital cord via
the DIGITAL OUT (COAXIAL) jack.
— Amplifier (receiver) with digital input
jack
— Amplifier (receiver) with a built-in DTS,
MPEG audio, or DOLBY DIGITAL
decoder
— MD or DAT deck
For connection details, see page 19.
Select “DOLBY DIGITAL,” “MPEG,” and
“DTS” after setting “DIGITAL OUT” to
“ON.”
x
DOLBY DIGITAL
Selects the Dolby Digital signals output via
the DIGITAL OUT (COAXIAL) jack.
x
MPEG
Selects the MPEG audio signals output via
the DIGITAL OUT (COAXIAL) jack.
ON
Normally, select this position. When you
select “ON,” set “DOLBY DIGITAL,”
“MPEG,” and “DTS.” For details on
setting these items, see “Setting the
digital output signal.”
OFF
The player does not output the audio
signals via the DIGITAL OUT
(COAXIAL) jack. The influence of the
digital circuit upon the analog circuit is
minimal.
Setting the digital output signal
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
DTS:
OFF
D-PCM
Select this when the player is
connected to an audio component
lacking a built-in Dolby Digital
decoder. You can select whether the
signals conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the “DOWNMIX”
item in “AUDIO SETUP” (page 61).
DOLBY
DIGITAL
Select this when the player is
connected to an audio component
with a built-in Dolby Digital
decoder.
If the player is connected to an audio
component lacking a built-in Dolby
Digital decoder, do not set this.
Otherwise, when you play the Dolby
Digital sound track, a loud noise (or
no sound) will come out from the
speakers, affecting your ears or
causing the speakers to be damaged.
PCM
Select this when the player is
connected to an audio component
lacking a built-in MPEG decoder. If
you play MPEG audio sound tracks,
the player outputs stereo signals via
the DIGITAL OUT (COAXIAL)
jack.
MPEG
Select this when the player is
connected to an audio component
having a built-in MPEG decoder. If
the player is connected to an audio
component lacking a built-in MPEG
decoder, do not set this.
Otherwise, when you play the MPEG
audio sound track, a loud noise (or no
sound) will come out from the
speakers, affecting your ears or
causing the speakers to be damaged.
Summary of Contents for DVP-NS300
Page 1: ...Operating Instructions 3 069 729 11 1 CD DVD Player DVP NS300 2001 Sony Corporation ...
Page 74: ......
Page 75: ......
Page 76: ...Sony Corporation ...