64
Additional Information
Troubleshooting
If you experience any of the following
difficulties while using the CD/DVD player,
use this troubleshooting guide to help remedy
the problem before requesting repairs.
Should any problem persist, consult your
nearest Sony dealer.
The power is not turned on.
,
Check that the mains lead is connected
securely.
There is no picture.
,
The connecting cords are not connected
securely.
,
The connecting cords are damaged.
,
The CD/DVD player is not connected to the
correct TV input jack (page 17).
,
The video input on the TV is not set so that you
can view pictures from the CD/DVD player.
,
In the Setup Display, set “LINE” in
“CUSTOM SETUP” to the appropriate item
that conforms to your system (page 59).
Picture noise appears.
,
The disc is dirty or flawed.
,
If the picture output from your CD/DVD
player goes through your VCR to get to your
TV, the copy-protection signal applied to
some DVD programmes could affect picture
quality. If you still experience problems even
when you connect your CD/DVD player
directly to your TV, please try connecting your
CD/DVD player to your TV’s S video input
The picture is black and white.
,
In the Setup Display, set “LINE” in
“CUSTOM SETUP” to the appropriate item
that conforms to your TV(page 59).
,
Depending on the TV, the picture on the
screen becomes black and white when you
play a disc recorded in the NTSC colour
system.
Even though you set the aspect ratio
in “TV TYPE” of “SCREEN SETUP,”
the picture does not fill the screen.
,
The aspect ratio of the disc is fixed on your
DVD.
There is no sound.
,
The connecting cord is not connected securely.
,
The connecting cord is damaged.
,
The CD/DVD player is connected to the
wrong input jack on the amplifier (receiver)
,
The amplifier (receiver) input was not
changed so that you can listen to the CD/DVD
player.
,
The CD/DVD player is in pause mode or in
Slow-motion Play mode.
,
The CD/DVD player is in fast forward or fast
reverse mode.
,
If the audio signal does not come through the
DIGITAL OUT (COAXIAL)
jack
, check the
audio settings (page 61).
Sound is noisy.
,
The disc is dirty or flawed.
,
When playing a CD with DTS sound tracks,
noise will come from the LINE OUT L/R
(AUDIO)
jack
(page 31).
Sound distortion occurs.
,
Set “AUDIO ATT” in “AUDIO SETUP” to
“ON” (page 61).
Power
Picture
Sound
Summary of Contents for DVP-NS300
Page 1: ...Operating Instructions 3 069 729 11 1 CD DVD Player DVP NS300 2001 Sony Corporation ...
Page 74: ......
Page 75: ......
Page 76: ...Sony Corporation ...