62
◆
PAUSE MODE (DVD only)
Selects the picture in pause mode.
◆
TRACK SELECTION (DVD only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD on which multiple audio
formats (PCM, MPEG audio, DTS, or Dolby
Digital format) are recorded.
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION”
setting has higher priority than the “AUDIO”
settings in “LANGUAGE SETUP” (page 59).
• If you set “DTS” to “OFF” (page 64), the DTS
sound track is not played even if you set
“TRACK SELECTION” to “AUTO.”
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels,
the player selects PCM, DTS, Dolby Digital, and
MPEG audio sound tracks in this order.
◆
MULTI-DISC RESUME (DVP-NS415
only) (DVD/VIDEO CD only)
Switches the Multi-disc Resume setting on
or off. Resume playback can be stored in
memory for up to 6 different DVD/VIDEO
CD discs (page 32).
AUTO
FRAME
The picture, including subjects
that move dynamically, is
output with no jitter. Normally
select this position.
The picture, including subjects
that do not move dynamically,
is output in high resolution.
OFF
AUTO
No priority given.
Priority given.
ON
OFF
Stores the resume setting in
memory for up to six discs.
(The settings remain in
memory even if you select
OFF.)
Does not store the resume
setting in memory. Playback
restarts at the resume point
only for the current disc in the
player.
Settings for the Sound
(AUDIO SETUP)
“AUDIO SETUP” allows you to set the
sound according to the playback and
connection conditions.
Select “AUDIO SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 58).
The default settings are underlined.
◆
AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to “ON.” The player reduces the audio
output level.
This function affects the output of the LINE
OUT L/R (AUDIO) jacks.
◆
AUDIO DRC (Dynamic Range Control)
(DVD only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to “AUDIO DRC.” This affects the
output from the following jacks:
– LINE OUT L/R (AUDIO) jacks
– DIGITAL OUT (OPTICAL or COAXIAL)
jack only when “DOLBY DIGITAL” is set
to “D-PCM” (page 63).
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
DOLBY DIGITAL:
MPEG:
D-PCM
PCM
DTS:
OFF
OFF
ON
Normally, select this position.
Select this when the playback sound
from the speakers is distorted.
STANDARD
TV MODE
WIDE
RANGE
Normally select this position.
Makes the low sounds clear
even if you turn the volume
down.
Gives you the feeling of
being at a live performance.