70
To turn off the Sound Feedback
function
When there is no disc in the player, press and
hold
X
on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.
Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player with a AV amplifier
(receiver), you can control the volume with
the supplied remote.
Check the model name of your remote
The supplied remote commander is different
depending on the player model. Check the
model name of your remote (RMT-D131E,
RMT-D131O, or RMT-D131A) and follow
the instructions that correspond to your
remote’s model name. Note that the buttons
you can use for operating your TV will differ
according to the model of your remote.
Notes
•
Depending on the units being connected, you may
not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.
•
If you enter a new code number, the code number
previously entered will be erased.
•
When you replace the batteries of the remote, the
code number you have set may be reset to the default
setting. Set the appropriate code number again.
Model name
