22
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects: TVS DYNAMIC (page 58),
TVS WIDE (page 58)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 59)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 59)
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 87)
– DTS (5.1 ch) (DVP-NS905V only) (page 87)
– Super Audio CD Multi channel (page 88)
– MPEG audio (5.1 ch) (page 87)
or
AV amplifier (receiver) with digital input jacks
having a Dolby, DTS**, or MPEG audio decoder
and 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 87)
– DTS (5.1 ch) (page 87)
– MPEG audio (5.1 ch) (page 87)
A
D
A
B
C
D