81
Set
tings
a
nd
Adj
u
st
m
e
nt
s
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and the balance of the
speakers to the same level.
This setting is effective when connecting the
speaker with 5.1CH OUTPUT jacks (page
27).
Select “SPEAKER SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 74).
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that
only the “SIZE” setting does not return to the
default setting.
◆
SIZE
Selects the size of the speakers.
• FRONT
• CENTER
• REAR
* Rear speaker position
Correctly specify the location of the rear speakers to
enjoy the surround effect.
• Set to “SIDE,” if the location of the rear speakers
corresponds to section
A
below.
• Set to “REAR,” if the location of the rear speakers
corresponds to section
B
below.
This setting affects only “VIRTUAL REAR
SHIFT,” “VIRTUAL MULTI REAR,” and
“VIRTUAL MULTI DIMENSION” mode (page
59). This setting does not affect the Super Audio
CD Multi audio signals.
LARGE
Normally select this position.
SMALL
Select this when the sound
distorts or the surround effects
are difficult to hear.
SPEAKER SETUP
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
YES
LARGE(REAR)
LARGE
LARGE
REAR:
SUBWOOFER:
SIZE:
NONE
Select this if you do not connect
a centre speaker.
LARGE
Normally select this position.
SMALL
Select this when the sound
distorts or the surround effects
are difficult to hear.
NONE
Select this if you do not connect
rear speakers.
LARGE
(REAR/SIDE): Normally select
this position. Select according
to the rear speaker position*.
SMALL
(REAR/SIDE): Select this
when the sound distorts or the
surround effects are difficult to
hear.
Select according to the rear
speaker position*.
90
20
45
,
continued
