27
Pl
ay
bac
k
2
Press
c
repeatedly to adjust the
delay.
Each time you press
C
/
c
, the delay is
adjusted by 10 milliseconds.
3
Press ENTER.
The selected setting takes effect.
To reset the “AV SYNC” setting
Press CLEAR in step 2.
b
• This function is not effective if you use the
DIGITAL OUT (COAXIAL) jack, and set
“DOLBY DIGITAL,” “MPEG,” or “DTS” in
“AUDIO SETUP” to “DOLBY DIGITAL,”
“MPEG,” or “ON” respectively (page 36).
• This function is not effective if you connect a
Dolby Digital or DTS-compliant device via the
HDMI OUT jack, and set “DOLBY DIGITAL,”
“MPEG,” or “DTS” in “AUDIO SETUP” to
“DOLBY DIGITAL,” “MPEG,” or “ON”
respectively (page 36).
• For DATA disc or USB (DVP-NS728H and
DVP-NS728HP only), this function works for
video files only.
Locking discs
(PARENTAL
CONTROL)
You can set two kinds of playback restrictions
as following:
• Custom Parental Control
• Parental Control
After selecting
(PARENTAL
CONTROL) on the Control Menu (page 19),
the options appear as shown below.
Select the option you want.
The default setting is underlined.
• ON
t
: Sets the playback restrictions so
that the player will not play inappropriate
discs (Custom Parental Control)
• PLAYER
t
: Playback of some DVD
VIDEOs can be limited according to a
predetermined level such as the age of the
users. Scenes may be blocked or replaced
with different scenes (Parental Control).
See “Parental Control (limited playback)”
(page 27) for detailed settings
• PASSWORD
t
: Enter a 4-digit password
using the number buttons. The same
password is used for both Custom Parental
Control and Parental Control. Also use this
menu to change the password
• OFF
t
: Turns off the Custom Parental
Control function
Parental Control (limited playback)
You can set a playback limitation level.
1
After selecting
(PARENTAL
CONTROL) on the Control Menu
(page 19), press
X
/
x
to select “PLAYER
t
,” then press ENTER.
The password is required.
2
Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.
The display for setting the playback
limitation level appears.
3
Press
X
/
x
to select “STANDARD,” then
press ENTER.
The selection items for “STANDARD”
are displayed.
4
Press
X
/
x
to select a geographic area as
the playback limitation level, then press
ENTER.
The area is selected.
When you select “OTHERS
t
,” select
and enter a standard code in the table on
page 47 using the number buttons.
5
Press
X
/
x
to select “LEVEL,” then press
ENTER.
The selection items for “LEVEL” are
displayed.
6
Select the level you want using
X
/
x
, then
press ENTER.
Parental Control setting is complete.
The lower the value, the stricter the
limitation.
To turn off the Parental Control function,
set “LEVEL” to “OFF.”
,
continued
